Logic display bezels
I’m at the point where I’m putting together the electronics for the dome lights. Most of the parts have been ordered, so in the mean time, I wanted to print the bezels for the logic display. This was more involved than I thought. Mr. Baddeley doesn’t seem to have the .stl files for the bezels, but I found some files on thingiverse here.
So one of my first prints was in PLA in grey in the picture. In looking at the tool path in Slic3r, it appeared that with the .4mm nozzle couldn’t make a complete circle around the LED holes. The result was all of the innards of the part didn’t connect to each other. I had been wanting to test a .25 mm nozzle and so I made the switch. The process took a little longer than I anticipated, as I broke the thermistor on the hot end. A week later, I was able to put the printer back together with the smaller nozzle. It takes forever to print with a small nozzle, but the result was great.
